Non-GHG Air Emissions

Exposure to air pollution can affect everyone’s health. It is the greatest environmental threat to public health globally. The World Health Organization () recently issued stricter recommendations on safe air pollution levels in a bid to curb the millions of premature deaths and loss of millions more healthy years of life caused by air pollution.

Specific Policies and Commitments

The OMV Group’s Environmental Management Standard stipulates that all OMV Group businesses and activities must understand the impacts of their air emissions on local and regional ambient air quality. Air emissions are required to be monitored, controlled, and minimized in order to mitigate the potential effects on human health and harm to the environment. There are strong legal requirements surrounding air emissions in the , which is where all our refineries are located. For instance, the EU does not permit the use of fuels containing sulfur to prevent transport-related SOx emissions. Sulfur has a significant impact on health, for example sulfur dioxide affects the respiratory system, particularly lung function, and can irritate the eyes. It causes coughing and mucus secretion and aggravates conditions such as asthma and chronic bronchitis.

Management and Due Diligence Processes

Monitoring

In all our refineries, we monitor emissions of pollutants such as sulfur oxides (SOx), nitrogen oxides (NOx), carbon monoxide (), particulate matter/dust, and non-methane volatile organic compounds (NMVOCs) as required by European and national legislation and the respective permits. If emissions are found to be in excess of nationally prescribed limits and/or limits defined in a permit, additional monitoring stations are installed, and measures are implemented. For example, in OMV Tunisia, pollutant emissions from combustion processes such as NOx or CO have caused great public concern due to their impact on health and the environment. The past decade has witnessed rapid changes both in the regulations for controlling gas turbine emissions and in the technologies used to meet these regulations. Monitoring of these emissions is typically performed with a Continuous Emissions Monitoring System (CEMS), which is a packaged system of gas analyzers necessary for the determination of gases and particles to stay within Tunisian emissions regulations. Because of this, we installed a pollutant analyzer on the turbines at .

Prevention and Treatment

OMV has long implemented technologies to reduce emissions, such as installing end-of-pipes, abatement technologies, and floating roofs to reduce emissions of VOCs. Over the past years, we have focused on upgrading such technologies to ensure that they are still effective and reducing emissions. For instance, a SNOx flue gas cleaning plant at the Schwechat refinery was commissioned. With the SNOx Refurbishment of Wet Sulfuric Acid () program, in which a solution patented by OMV (two-layer PFA film structure with monitoring system) was implemented, both the reliability and the availability of the flue gas cleaning system could be increased. The flue gas cleaning plant at the Schwechat refinery is used for the removal of dust, and for denitrification and desulfurization of flue gases from the two power plants before they are emitted via the stack. As a first process step, dust is separated via electrostatic precipitators. During selective catalytic reduction, nitrogen oxides (NOx) are converted into free nitrogen (N2) and water (H2O) by injecting ammonia (NH3). In the third step, sulfur dioxide (SO2) is oxidized with the aid of a catalyst and reacts with residual moisture to form gaseous sulfuric acid. Finally, the sulfuric acid is condensed in the WSA by means of air cooling and heat recovery. The sulfuric acid obtained in this way is then either sold or used for pH adjustment within the refinery. By applying these process steps, 98% of dust can be separated, more than 96% of sulfur can be recovered, and around 95% of NOx emissions can be prevented. With the catalyst update, a NOx reduction rate of around 95% is now achievable again. At other emissions sources at the Schwechat refinery, we continued our work on reducing emissions to air. The installation of a fourth electrical field at the existing electrostatic precipitator of the FCC plant aided the significant reduction of dust emissions.

2023 Actions

The following key activities were carried out across the Group in 2023:

  • In Norway, we included the reduction of emissions to air in our drilling operations by incentivizing emissions reduction measures in our drilling contracts. As a result, in the Velocette drilling campaign, selective catalytic reduction was installed at the engine exhausts to reduce NOx emissions by approximately 74%.
  • In 2023, Borealis put a wastewater treatment plant in Stenungsund into operation. The new wastewater treatment unit will reduce the emission of contami­nants to the sea and will also minimize  emissions to the air, since all treatment steps are covered and enclosed. The new unit includes buffering in two tanks and physical and chemical treatment of the water in Dissolved Nitrogen Flotation (DNF) units. The off-gas from the different steps will be treated by adsorption in carbon filters.
  • OMV Petrom continues to restore sites as it has done previously for former fuel terminals or abandoned facilities. The best practices applied include the use of a water spray curtain, dust protection nets, forced ventilation, off-site bioremediation of the most heavily contaminated soil, and periodic communication with the community and the authorities. In periods of strong wind, OMV Petrom always minimizes dust-producing activities, wets surfaces more thoroughly, and covers the surfaces of on-site biopiles. This subsequently reduces the impact on the air quality. Regarding odor and dust control during soil excavation and transport, OMV Petrom has optimized transportation routes to minimize disturbance to the community, and always secures loads and cleans the wheels at the site exit to avoid the contamination of public roads, and sprinkles the access roads on site.
  • In OMV Petrom R&M, the leak detection and repair () program in accordance with Reference Documents () continued to be carried out at the Petrobrazi refinery. The objective of this program is to reduce fugitive emissions from the plant’s technical equipment (e.g., vents, flanges). We continued the program, targeting accessible fugitive emissions sources from coking, the catalytic reforming complex, catalytic cracking and GASCON units, as well as the tank park including the screening of inaccessible sources. 48% of the leakages identified could be fixed. The program will run periodically, according to a schedule, in all Petrobrazi installations.

Outlook

In 2021, we launched a pilot project to develop an Odor Management Plan for one representative facility at an E&P asset of OMV Petrom. Due to legal uncertainties, the pilot project could not be finalized in 2023. As soon as requirements are clear, we will finalize the development and implementation of the Odor Management Plan.

WHO
World Health Organization
EU
European Union
CO
carbon monoxide
GTP
gas treatment plant
WSA
Wet Sulfuric Acid
VOC
volatile organic compund
LDAR
Leak Detection and Repair
BAT
Best Available Techniques
BREF
BAT (Best Available Techniques) Reference Document